Cable drawings and instructions
Kit numbers 3000-3099
On this page you will find all you need to setup your Network Interface together with the radio or other device that you are using.
New kits and instructions will be added as we go along and they are needed.
The cable kits are sorted after their article number. For each kit there is a drawing and for kits that are made for a certian device, there is also a setup instruction.
Some kits can be used with more that one radio type, so make sure that you get the correct version.
Since the drawings and the instructions are updated from time to time. Always check that you are using the latest version.
Kit number and purpose
For 3009/12, SoftLine, Motorola GM-series, control head side.
Setup instructions included in the SoftLine setup, found on the Technical Download Page.
For 3009/17 & 3130, Motorola GM/DM-series w. 20-pin backport
For 3009/17, 3009/21 & 3130, Motorola CM-series w. 16-pin backport
For 3009/16, Motorola DM3600 & DM4600 (new version from Jan 2021)
For 2725/00, POTS phone – power cable
For 3009/01, Ericsson Aurora / Niros TRX3001
For 3009/17, 3009/21 & 3130, Motorola MTM5200/5400 w. 26-pin backport
For 3009/27, SoftLine with Microphone and speaker leads
For 3009/07, 2-Wireline connection, line level -10dB in/out
For 3009/22 & 3009/10, 4-Wireline connection, line level -10dB in/out
For 3009/22 & 3009/10, 4-Wireline connection, line level -10dB in/out, w. I/O´s in/out
For 3009/30, Kenwood TK-7180/8180-series and more
For 3009/38, Kenwood NX-5000 series
For 3009/00, 6-Wireline connection, line level -10dB in/out, separate PTT
For 3009/24, Motorola MTM5200 & MTM5400 + emergency trigger PIN23
For 3009/39 and Maestro100