Installation of the Network Interfaces
and the Radios
We offer installation brackets, rack shelves and rack boxes, as well as pre installed systems.
Here are some examples. Please ask if you have special needs.
Front mounting
The large Network Interface (silver box) has two threaded holes (M4) on the front panel.
These can be used for mounting the box on a panel surface.
A drawing of the box can be found on the technical download page.
Please note that the small black interface box does not have the threaded holes. If you need to install the Network Interface LE by the help of the holes, there is an option to order also the LE interface in the larger box.
Mounting Bracket
For installation of the interfaces on a flat surface there are two sizes of mounting brackets.
Bracket for the:
– large interface (silver) Article: 3106
– small interface (black) Article: 3106/02
Mounting brackets, small and large
Rack Installation - Open Rack Shelf
We deliver ready made rack shelves and rack boxes with the Network Interface, cable kit, a power supply and fuses. In some cases we also deliver the radio, in some cases the radio is added later by the dealer/customer.
Rack shelf installation with Sepura Tetra radio
Rack shelf installation with Icom M423 marine radio
The 3U open rack shelf that is normally used.
There are more information about the rack shelf and the closed rack unit on the technical download page.
Rack Installation - Closed Rack Unit
Rack box installation seen from front, standard with radio inside and blank front, and the alternative version with the radio front flush mount in the panel.
Rack box installation seen from top,
with the lid off
The 3U rack box that is normally used.
Wall Mounting
Example of wall mount box installation
Motorola GM380, NetworkInterface and power supply in a wall mount box 500x600x300mm.
Example of wall mounting
Rack Cabinets
Example of rack cabinet installation
Open rack shelf with a marine radio, cabinet with glass door.
The cabinet holds three shelves with radios. Router and fibre converter at the bottom. Antenna connectors on top.
Marine radio mounted on a shelf and
placed inside a small floor cabinet
Special installations
On customer demand, we can build large rack cabinets with the radios, interfaces, power, IP etc.
They can be built in a standard rack cabinet like the one for the Copenhagen airport or they can be designed to fit inside a car, like the one for the command and control vehicle.
Please ask.
Cabinet at the Copenhagen Airport.
Cabinet with 10 rack units containing two Tetra terminals and two Network Interfaces each. At the top IP switches that run on 12VDC. At the bottom chargers and batteries for 12VDC that supplies power to the whole cabinet.
Equipment rack in the back of a Command and Control vehicle.