Functionality
Channel/frequency selection is made by stepping up/down or by entering the channel name on the keypad. There is a virtual keypad on the control head and you can use the PC keyboard.
The squelch can be operated on/off like on the ordinary control head. The squelch offset can also be set (new function from December 2024).
A standby channel can be entered and easily switched to. And both channels can be monitored at the same time (dual watch / scan function).
Connection to the radio is made from the 25-Pin D-sub connector.
No special programming is needed in the radio.
Suitable Network Interface is 3009/60.
Cable kit 3328.
If you do not need the ability to change channel or set the squelch, you can use the simpler solution described on this page.
Examples of use:
- Local use when several dispatchers want to share one radio
- Remote use where a dispatcher at one location want to talk to radio users at a different location
- Remote use with the radio onboard a UAV
Virtual Control Head for
Trig TY91
Entering a new channel
Virtual Control Head Functions
One airband radio remote controlled from one operator PC.
Two airband radios and one Tetra radio remote controlled from two operator PC´s.
A remote controlled radio is placed onboard a UAV so that the operator can use it as if he was onboard.