Mimer SoftLine gives you the ability to connect radio systems together although they are at different radio sites.

This is the most common use for Mimer SoftLine, to bridge radio systems together although they are geographically apart. The bridge can be between systems of the same type just as well as between different system types.

Vokkero systems can also be bridged together or to other system types.

If you have Vokkero intercom systems at different sites that needs to talk to each other and work as one large system. You can connect them together using Mimer SoftLine.

A virtual 4-wire line will be setup over IP using a local LAN or the Internet. The two Vokkero “WI” 4-wire units will connect to the local systems.

The systems can be in different parts of the world.

Patching two Vokkero systems together that are located at different sites.

If you need to connect your Vokkero intercom system to a radio system at another site. Mimer SoftLine can make the connection over IP. All types of radio systems can be connected, like marine radio, airband radio, DMR or Tetra.

If you have a local connection, with the two systems at the same site, you can use the Mimer X-Link instead.

Briging a Vokkero system to a DMR system, located at a different site.

Same as above but the radio system has a full duplex base station.

You can connect with full duplex all the way so that the base station transmits all audio from the Vokkero intercom and the portable radios can answer to the conference at the same time. The radios become true parts of the Vokkero intercom.

Briging a Vokkero system to a Duplex system, located at a different site.

Please also see our other cross patch products.
– Mimer SoftRadio with the option for cross patch activated.
– Mimer X-Link, the dedicated interface for cross patch when the radios are at the same site.

There is a presentation of the different methods to build a cross patch available here.

Please also see our solutions with Mimer X-Link and Mimer SoftRadio for Vokkero.